Pool Supplies

!±8± Pool Supplies

Pool supplies can generally encompass a whole array of equipment for pools. Some of these are pool sweeps, filter grids and cartridges, saltwater chlorinators, pool pumps and motors, pool filters, pump/filter combinations (skid packs for above-ground pools), pool heaters, timers and controls (electronic controls, pool timers, freeze guards), lights, valves and plumbing, and parts (cleaners, pumps, filters, heaters), as well as pool covers. Slides, diving boards, ladders, liners, and other accessories also form a part of swimming pools.

The first step toward a clean pool is pool water care. For this, a common oxidizer/sanitizer, like chlorine, is used to burn up organic material in the water, which greatly reduces the load on the filter. Care has to be taken to maintain the pH balance and proper total alkalinity level, as well as to check calcium hardness and stability. It also makes sense to get a pump that is sized properly and that won't waste energy. A good pump should be able to pump the entire capacity of the pool in eight hours. An automatic pool cleaner is a necessary luxury that saves time. There are many pool supply websites, like Poolplaza, which displays a good range of pool equipment and cleaners; pool supply websites also provide the advice needed to select the right supplies for the pool.

Pool filters come in three varieties: Sand, D.E., and Cartridge. These days, pool heaters offer advanced designs that are much more dependable, energy efficient, and durable, besides having several more features. There are pool heaters that are even equipped with integrated pool timers and freeze protectors.

Among the available pool cover supplies are solar blankets, solar reels, domes, safety covers, and winter covers. These days, hot pods (a kind of floating spa), slime bags (to clean dirty or cloudy water), and accessories that are meant for pets are also available.

Pool Supplies

Gunvault Gun Safe On Sale Skechers Somethin Else Decide Now Sliding Window Tcp Best

Intex 2000 gph Water Filtration Pool Pump with Built-in Chlorine Generator

!±8±Intex 2000 gph Water Filtration Pool Pump with Built-in Chlorine Generator

Brand : Intex
Rate :
Price : $217.99
Post Date : Dec 25, 2011 10:02:29
Usually ships in 1-2 business days

The Intex Saltwater Chlorine Generator Pool Filter Pump is much safer and more efficient than using packaged store-bought chlorine for your above ground pool. Say goodbye to red burning eyes, faded clothes, and ruined pool liners. Simply hook the Intex saltwater generator into the pool's water flow as directed, add the specified amount of salt, and the chlorine Generator will do the rest. The pool's water is converted to an effective algaecide - and since salt doesn't evaporate or dissipate as chlorine does, the constant addition of chlorine chemicals is a thing of the past. Keep your pool incredibly clean, crystal clear and fresh at all times with this Intex saltwater system chlorine generator.

Great Deals Floor Clock Howard Miller Promotional Gate Houses

Installation of Zodiac Clearwater Ei Salt Chlorinator

!±8± Installation of Zodiac Clearwater Ei Salt Chlorinator

Installing the Zodiac Clearwater Ei Chlorinator. Pool Supplies. Salt chlorinator. www.redbaronpoolsupplies.com.au

Installation of Zodiac Clearwater Ei Salt Chlorinator

Toro 521 Parts Buy Now

How To Close A Pool

!±8± How To Close A Pool

When it comes time to close your swimming pool for the year it is important to consider a number of different factors. The most important thing that you want to do before you close your pool is be sure to clean the pool completely so that there is no leaves or debris in the bottom of the pool and the water should be crystal clear with a measurable chlorine count.

Clean The Pool
If you do not take the time to clean your swimming pool before you close it for the season you'll find that the start up of the pool next spring will be much more difficult. There will be a great deal of algae that has grown over the winter season as a result of the organic debris that was left in the pool at the time of closing. The organic debris uses up the sanitizer,or chlorine, that you put into the water. Without any sanitizer in the water the bacteria will grow unrestricted resulting in cloudy water with plenty of food for algae to grow. The water will be very green in the spring and require much more effort and much more money spent on chemicals to resolve the problem and restore the swimming pool to a swimable condition.

Winterizing The Skimmer
Once you have the chemical balance in the water under control and have removed any organic debris or material in the swimming pool it is time to prepare to close the pool. To close the pool properly you must in drain the water down below the lowest return fitting. With the water level down this low you can manage to remove all of the water from the plumbing lines by way of blowing them out with an air blower or shop Vac vacuum set on the blow setting. The goal here is to remove the water completely to prevent any freeze expansion that could happen if there is water left in the pipes. If you do not successfully remove all of the water from the suction lines and the return lines it is very likely that you will end up with a leaking condition in your pool come springtime. It is not necessary to put anti-freeze liquid into the plumbing lines. To remove the water from the skimmer line you would set up a shop vac vacuum or air blower in the mechanical room next to the pump and he would blow the air from the pump all the way back to the swimming pool. Once you turn on the air blower the water should come flying out of the top of the skimmer however you will need to leave your air blower running for as many as 5 to 10 min. to successfully remove enough of one of the water from the skimmer that you can plug it off with a threaded plug or rubber expansion plug.

Winterizing The Returns
When winterizing the skimmer of your swimming pool it is critically important to put something down inside of the skimmer that will allow the ice that forms in there from precipitation and snow melts to not freeze and expand ultimately cracking the inside of the skimmer. The name of the product that is made for this purpose is called a gizmo which is essentially a small sealed bottle threaded down into one of the bottom ports of the skimmer. You could also use a pop bottle for example a 2 L bottle of pop partially filled with water so that the bottle will have neutral buoyancy. This allows the ice to crush inwards on this bottle as opposed to the outwards on the skimmer.

In order to properly remove all of the water from the return lines you must start at the mechanical room or pump room and blow the water back towards the pool once you have lower the water level below the return fittings. With the water level below the return fittings the water will shoot out from the returns into the swimming pool. When the water is first reaching the pool it will be hard to hold the air blower in place but after 10 to 15 seconds of running air through the system it will become a much easier to manage as the weight of the water in the lines will reduce. When you plug the returns you must do so while the air blower is still blowing so this process may require two people to complete. Be sure to plug the return that is closest to the pump room first as this will force any remaining water inside of the system to the next return line and further away. If you were to go in the opposite order and plug the return that is furthest from the pump first this would trap a pocket of water inside the plumbing lines and very likely cause a leak due to a frozen and cracked pipe. Once the skimmer and return lines have been blown out there is only two things left to consider which is covering the swimming pool and winterizing the equipment such as the pump filter and heater.

Covering The Pool
There are a few different kinds of swimming pool covers that can be used for the winter season. Of the Newer and more expensive variety are stretch safety covers which use spring compression to make the cover tight across the pool. Stretch covers require that anchors are installed into the deck all around the swimming pool and this is one of the most expensive forms of Winter covers. The other options for winter covers for a swimming pool are tarp covered whereby you would use water bags to hold a large tarp in place around the circumference of the swimming pool. The other option is what is called a lock-in the cover which can be made of vinyl or a much lighter Polyweave material. Lock-in covers connect into a separate coping track in the same way that a vinyl liner does into a coping track. Once in place you add water onto the top of the cover and this helps to hold it completely in place. This type of cover does not require any water bags or any anchors attached into the deck around the swimming pool.

Winterizing The Pump
The first thing when winterizing the equipment for your swimming pool is to remove the winterization plugs from the pump. Most swimming pool pumps have two winterization plugs usually one on the front of the wet end and one on the side where the wet end meets the motor component. When you remove these plugs this allows all the water inside of the pump and impeller compartment to drain away. No further blowing out of the pump is required as this removing of winterization plugs is all that is needed to protect your swimming pool pump for the winter. The pumps are made to stay outside for the winter season. It is not required to bring them indoors if you have removed all the water from the system. Once you have removed a winterization plug it is critically important to not lose it. The most common accepted standard is to place all of the winterization plugs from your equipment into the pump strainer basket and that is where you will store it for the off-season.

Winterizing A Sand Filter
Once you have completed the winterization of your pump you can turn your attention towards the filter. Most swimming pools in North America make use of a sand filter system. With this type of filter the first thing to do is to remove the drain plug from the bottom of the tank. It will take a few days total before the tank is drained completely. In addition to this you must be sure to set the dial of the sand filter into the winterization position to minimize any chance of breaking the filter head due to water trapped inside freezing. The filter head itself also has a pressure gauge and a backwash site glass which must be removed and then stored in the strainer basket for the pump for the season to ensure that you do not lose them.

Winterizing A Cartridge Filter
If you have a cartridge style filter for your system. You will need to open the filter and remove the four cartridges inside. Most swimming pool filters have a four cartridge system. However there are some two and three cartridge systems also. You want to remove these filters and clean them during the off-season. The way to clean the pool filter is to soak the filter in a cleaning solution that is made out of one cup of automatic dishwasher detergent to 5 gallons of water. You want to submerge the filters completely in this solution for a period of 12 to 24 hours before rinsing thoroughly. It is usually enough to just perform this maintenance task once per season. Any swimming pool with a high bather turnover rate you might want to consider doing this twice a season. As with the sand filter there is a main drain plug on the bottom of the filter tank which you will want to remove. Any pressure gauges should also be removed from the filter tank and stored in the skimmer basket for the pump.

Winterizing The Heater
The heater if you have a gas heater is the most expensive component of the plumbing system and it is very important that you winterize it properly. Failure to winterize the heater properly will almost surely results in a cracked heat exchanger which will be a very expensive repair in the spring. To properly winterize a gas heater you must remove the winterization plugs on the outside. These are usually four 9/16 inch or 1/2 inch bolts on the outside of the heater. It is very common for these bolts to become rusted over time and great care must be used to make sure that you do not strip these threads or these nuts. If your heater has a pressure switch as most older style heaters have you will need to open the heater and open the pressure switch by using two 7/16 inch combination wrenches. This will allow a small amount of water to escape from the heater. Once you have removed the winterization plugs and you have opened the pressure switch you can blow air through the plumbing system of the heater using your air blower or shop vac. This will force water out of all of the winterization ports on the heater. It is a good idea to keep the blower running for at least 5 to 10 min. to ensure that all water has been removed.

Be sure that all winterization plugs and O-rings are accounted for before closing up the system. Be sure that anything like a salt water cell or the ozone generator are removed from the system and stored indoors for the winter. Add 10L of chlorine to the pool as a final note before you finish putting the cover on and you should be good until next spring.

How To Close A Pool

Saved Intex 10x30 Pool Sump Pump Water Backup Buy

How to Clean Swimming Pools : How to Maintain Swimming Pool Systems

!±8± How to Clean Swimming Pools : How to Maintain Swimming Pool Systems

Find out how to maintain your swimming pool system, which should be running about one hour for every ten degrees outside; learn more with expert tips on pools in this free pool maintenance video clip. Expert: Francisco Cales Bio: Francisco Cales is the owner of Pool Inspectors a pool construction and maintenance company in Tampa, FL. Filmmaker: Adolph Ramirez

How to Clean Swimming Pools : How to Maintain Swimming Pool Systems

Solid Wood Sleigh Beds This Instant

1807-183rd St - Lansing

!±8± 1807-183rd St - Lansing

Luxurious Brick 2 Story. Countless amenities. Vaulted & Tray ceilings. Grand entrance with Oak staircase and Hardwood floor. Beautiful blend of Hardwood & Ceramic flooring. Solid Oak doors & trim. Kitchen has Oak Cabinets, desk area, Granite counters & a Large eating area with Vaulted ceiling & Plant shelf with a picturesque View of the yard. Stove, refrigerator, Dishwasher & Microwave included. Luxury master bedroom suite w/ balcony, tray ceiling, fabulous Jacuzzi tub, separate Shower, double sink vanity, toilet, bidet & walk in closet. Main level Family room w/ Brick Fireplace which has a fan to distribute the heat throughout the room. Formal Dining room w/ attractive mirrored wall. Finished Basement w/ Fireplace in the 2nd Family room, PLUS an Office or 5th bedroom. There is also a full bath. Could be used for related living because there are 2 sets of stairs... one to the main level and one to the exterior. 2 Balconies off the bedrooms w/ French Doors. Main level laundry room w/ Washer & Dryer Included. 3.5 car heated garage w/ running water & floor drain. Large Deck w/ hot tub. Heated Inground pool w/ Poolhouse & full bath. Pool also comes with a deluxe cover, heater, automatic chlorinator & filtration system. The home is quality throughout witn 2x6 construction except the front which is 2x4. Home is extremely well insulated. Zoned heating & cooling with 2 furnaces & Central air units. Inground sprinkling system. Vinyl Privacy fence. Bay windows. Mahogany / leaded ...

1807-183rd St - Lansing

Cheep Respironics Humidifier Promo 3m Projector Bulbs Bargain Sale Geneva Watches Prices

Swimming Pool Maintenance Tips For Beginners

!±8± Swimming Pool Maintenance Tips For Beginners

There are a lot of people who enjoy swimming as a sport and for leisure purposes. As a result a number of people have pools in their backyards. Swimming pool maintenance is important because you need to ensure that your pool does not have unhealthy pollutants. This can be done by cleaning it on a regular basis.

Most systems are equipped with an automatic cleaner. Its function is to remove small particles in the water. But there are bigger objects such as leaves that will require you to make use of a net. Ensure that your vacuum your pools regularly. To get an even better result clean the pool manually after emptying all the water.

Brush the walls to remove the dirt from the tiles and the walls and then finish off with a vacuum cleaner. It is extremely important for you to use the right chemicals. The right chemicals will keep the water clean and contaminants will not be an issue. Make sure that you do not overuse these chemicals because they can negatively affect anyone who comes in contact with the water.

The main chemical that is used to maintain pools is chlorine, therefore buy chlorine products. The chlorine basically disinfects and kills micro organisms such as bacteria. This should be added to the water after sunset because it works more effectively when there is no sunlight.

The pH levels also need to be measured using a water test kit. This will allow you to maintain the right pH balance as well as the right chemical quantities. Stale water will lead to bacteria and algae forming in pools. That is why frequent circulation is necessary. This basically prevents bacteria from setting in and get rids of the green algae.

Circulation will require you to make use of return jets. As long as the water has bacteria and algae, avoid swimming in it until you have taken care of the problem. You can do this by increasing the chlorine levels and ensure that you clean the water more regularly. In order to get rid of algae or prevent their growth you can make use of algaecides.

When you have cleaned the water of all the debris, the waste needs to be disposed off a distance away from the water. This is so that it is not blown back into the water. Those who have pools that are surrounded by trees and bushes have to prune them often because they could shed pollen grains. At the end of the day it is up to you the owner to take good care of your pool.

If you see that you are not able to do so yourself, you can find experts who can take care of the situation for you. If you have a salt water pool, you maintain it the same way you would maintain other pools. Just ensure that you keep a check on the level of salt. Swimming pool maintenance is easy once you understand what needs to be done.

Swimming Pool Maintenance Tips For Beginners

Discounted Mailboxes Wall Mount